Table of Contents
Advertisement
4.
Push the device to the rack along the rack shelf, and attach the mounting brackets on the device to
the front rack posts by using screws and cage nuts.
Figure 9 Installing the device to the rack
Installing the device by using mounting brackets and slide rails
The slide rails are optional components that need to be separately ordered if needed. The slide rails in
this example are for illustration only.
To install the device by using mounting brackets and slide rails:
1.
Wear the ESD wrist strap and verify that the rack is correctly grounded and sturdy enough.
2.
Use the screws packed with the mounting brackets to attach the mounting brackets to the device,
as shown in
3.
Install the slide rails to the rack
Figure
6.
5
Advertisement
Table of Contents
