Installing And Cabling The Hp Pc Bladesystem Pc Blade Enclosure; Measuring With The Rack Template - HP BladeSystem bc2000 - Blade PC Setup And Installation Manual

4 Installing and Cabling the HP PC
BladeSystem PC Blade Enclosure
This chapter contains the following procedures:
●

Measuring with the rack template

●
Installing the rack rails
●
Installing the enclosure into the rack
●
Cabling the HP PC BladeSystem PC Blade Enclosure
◦
Identifying HP PC Blade Switch connectors
◦
Cabling the enclosure
●
Powering up the HP PC BladeSystem PC Blade Enclosure
●
Powering down the HP PC BladeSystem PC Blade Enclosure
●
Installing a blade PC
● Removing a blade PC
● Installing additional memory
●
Attaching the diagnostic adapter
Measuring with the Rack Template
Using the rack template, identify the proper holes for inserting the tabs on the vertical rack supports.
Use a pencil to mark the top and bottom edges for the rack supports on the rack template, which identify
the position for the rails supporting the enclosure.
ENWW Measuring with the Rack Template 17