Blade Pc Event Messages; Hp Systems Insight Manager - HP BladeSystem bc2000 - Blade PC Setup And Installation Manual

Blade PC Event Messages

The event list displays the affected components and the associated error messages. The following table
identifies the event types (affected components) and associated event messages.
Table 5-7 Blade PC Event Messages
Event Type
Blade PC Environment
Overheat condition*
Operating System
Automatic operating system shutdown
Enclosure Environment
Overheat Condition
Fan Failure
NOTE: *For specific operating temperature ranges, see
NOTE: **Refer to the Integrated Administrator log for detailed messages.

HP Systems Insight Manager

NOTE: You can download HP Systems Insight Manager from the HP Web site.
HP Systems Insight Manager provides in-depth fault, inventory, and configuration management of HP
server platforms (including hundreds of blade PCs) from a single console. You can use HP Systems
Insight Manager to view each blade PC and the Integrated Administrator of each blade PC enclosure.
The system parameters that are monitored describe the status of all key blade PC and enclosure
components. By being able to view the events that occur to these components, you can take immediate
action.
Use the instructions in the following section to view and print the event list from within HP Systems
Insight Manager. You can also mark a critical or caution event as repaired after the affected component
has been replaced.
46 Chapter 5 Deployment and Management
Event Message
System Overheating (Zone X)
Automatic Operating System Shutdown Initiated Due to Fan
Failure
Automatic Operating System Shutdown Initiated Due to
Overheat Condition
The Integrated Administrator has issued an alert that its health
state has changed **
The Integrated Administrator has issued an alert that its health
state has changed **
Specifications on page 88.
ENWW