User Login
This switches the User Login Administration On/Off and sets the authentication network server.
User Login:
1
********************-
Login Type
Login Type (Enabling of User Login Administration)
Select Netwk Authentic. to enable User Login Administration.
Login Type:
1 *Off
********************-
2
Netwk Authentic.
Netwk Auth. Set (Netwk authentication
Set the network authentication server.
Note These settings are only displayed when Netwk Authentic. has been set as the Login Type (Enabling of
User Login Administration) on page 6-100.
Netwk Auth. Set: a b
1
********************-
Server Type
2
Host Name
3
Domain Name
1
2
a b
[ Exit
]
1
2
a b
3
4
setting
1
2
[ Exit
]
The options available in Netwk Auth. Set are as follows:
• Server Type (Server type selection)...6-101
• Host Name (Entering of Host Name)...6-101
• Port (Port number setting)...6-101
• Domain Name (Entering of Domain Name)...6-102
In the User Login Set. menu, press
Press [OK]. The User Login menu screen appears.
In the User Login menu, press
Press [OK]. The Login Type screen appears.
Press
or
to select Netwk Authentic. or Off.
Press [OK]. The User Login menu reappears.
Note When Netwk Authentic. is selected, set the
network authentication server.
)
In the User Login menu, press
Press [OK]. The Netwk Auth. Set menu screen appears.
6-100
Operation Panel
or
to select User Login.
or
to select Login Type.
or
to select Netwk Auth. Set.