Kyocera Ecosys FS-C8650DN Operation Manual page 103

Offset (Offset Setting)
Set whether each set of printed output is offset from the previous set.
Function:
1
********************-
Paper Output
2
Collate
3
Offset
Offset:
1
Off
1 *On ********************-
Duplex (Setting the duplex printing)
Set duplex printing. For details, refer to Duplex (Setting the duplex printing) on page 6-30.
Function:
1 ********************-
Paper Output
2
Collate
3
Offset
Duplex:
********************- 1 *Off
2
Bind Long Edge
3
Bind Short Edge
1
In the Copies menu or the Paper Selection menu, press
a b
[Function] ([Right Select]). The Function menu appears.
2
Press
3
Press [OK]. The Offset screen appears.
a b
4
Press
5
Press [OK].
The selected mode is set and you return to the function menu.
1
In the Copies menu or the Paper Selection menu, press
a b
[Function] ([Right Select]). The Function menu appears.
2
Press
3
Press [OK]. The Duplex screen appears showing the list of
a b
available duplex printing modes.
4
Press
The message display toggles through the following:
Off (default)
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
5
Press [OK]. The duplex printing mode is set and the Function menu
reappears.
4-19
or to select Offset.
or to select On or Off.
or to select Duplex.
or to select the desired duplex printing mode.
Document Box