Kyocera Ecosys FS-C8650DN Operation Manual page 201

Auto Err. Clear: a b
********************- 1 *Off
2
On
Err. Clear Timer (Setting the error clear time)
If Auto Err. Clear is set to On and a non-fatal error (an error that allows printing to continue) occurs, this setting specifies
the time until the error is recovered and printing resumes. The default setting is 30 seconds.
Err. Clear Timer: a b
(5 - 495)
/*30-sec.
Error Job Skip
Set whether a job for which a "Add paper in cassette #" or "Add paper in Multi Purpose tray" error occurred when the job
was started is automatically skipped after a set period of time elapses.
Note When a job is skipped, it is moved to the end of the job queue.
Error Job Skip:
1 *Off
********************-
2
On
1
In the Timer Setting menu, press
Clear.
2
Press [OK]. The Auto Err. Clear screen appears.
3
Press or
4
Press [OK]. The automatic error recovery setting is set and the Timer
Setting menu reappears.
1
In the Timer Setting menu, press
Timer.
2
Press [OK]. The Err. Clear Timer screen appears.
3
Use the numeric keys to set the recovery time.
4
Press [OK]. The recovery time setting is stored and the Timer Setting
menu reappears.
1
In the Timer Setting menu, press
2
Press [OK]. The Error Job Skip screen appears.
a b
3
Press
4
Press [OK]. The error job skip setting is set and the Timer Setting
menu reappears.
6-75
to select whether automatic error recovery is enabled.
or to select whether error job skip is enabled.
Operation Panel
or to select Auto Err.
or to select Err. Clear
or to select Error Job Skip.