Kyocera Ecosys FS-C8650DN Operation Manual page 244

Apply Limit (Operation settings when limits are exceeded)
Use this to specify the action taken when a department exceeds its printing limits.
Apply Limit:
1
Immediately
2 *Subsequently ********************-
Job Account.Set.:a b
4
********************-
Account. List
5
Apply Limit
6
Unknown ID Job
Unknown ID Job (Operation settings for unknown account IDs)
Use this procedure to specify whether print jobs from departments with unknown account IDs are permitted.
Unknown ID Job:
1 *Reject
********************-
2
Permit
Job Account.Set.:a b
********************- 4
Account. List
5
Apply Limit
6
Unknown ID Job
1
2
a b
3
[ Exit ]
1
2
a b
3
[ Exit ]
In the Job Account.Set. selection menu, press
Apply Limit.
Press [OK]. The Apply Limit screen appears.
• Immediately (prohibit printing from this job onwards)
• Subsequently (prohibit printing from the next job onwards)
Press or to select a setting and then press [OK]. The Job
Account.Set. selection menu list reappears.
In the Job Account.Set. selection menu, press
Unknown ID Job.
Press [OK]. The Unknown ID Job screen appears.
• Reject (Not printed)
• Permit (Printed)
Press or to select a setting and then press [OK]. The Job
Account.Set. selection menu list reappears.
6-118
Operation Panel
or to select
or to select