Secure Pull Printing (Optional Feature) - Kyocera Ecosys FS-C8650DN Operation Manual

IMPORTANT Remove the paper when you are not performing banner printing.
Note The print confirmation screen can be set in the system menu to not appear when the banner tray is attached.
This will allow continuous printing on multiple sheets. (Refer to Msg Banner Print (Preview screen setting for Banner
Printing) on page 6-82.)

Secure Pull Printing (Optional Feature)

Secure Pull Printing is a printing feature where a user pulls the print job to an afterward selected printer. To use this feature,
the following system environments are required.
6 User pulls the
print job from the
selected printer.
3 User logins to the
Authentication
Server using ID
card.
Authentication server: it has to install the KYOCERA Net Policy Manager (Option).
ID card and ID card reader: they are used to register and authenticate a user.
Spooler server: it pulls the print job to an afterward selected printer if user required.
For more details, contact your dealer or service representative.
8
Adjust the paper width guides on the banner tray to the same width
as the paper width guides on the multi purpose tray and lock.
5 Spooler server
sends the print job
to the selected
printer.
4 Authentication
Server confirms
the login
information
registered.
3-12
2 Spooler server
receives the
print job.
Printing
1 User sends the
print job to the
spooler server.