Kyocera Ecosys FS-C8650DN Operation Manual page 140

TIFF/JPEG Size:
1
********************-
Paper Size
2
Image Resolution
3
Print Resolution
XPS FitTo Page (Adjusting the XPS file print out size)
Reduces or enlarges the image size to fit to the selected paper size when printing XPS file.
Function:
1
********************-
Paper Output
2
Collate
3
Offset
XPS FitTo Page:
1 *Off
********************-
2
On
Detail (Shows the details of the selected file)
Use this to view detailed information on the files and folders in the USB memory.
2
Press
3
Press [OK]. The TIFF/JPEG Size screen appears.
a b
The options available in TIFF/JPEG Size are as follows:
• Paper Size (default)
Images are resized so that they fill the paper size when printed.
• Image Resolution
Image files are printed at the resolution specified in the
resolution information. Images with no resolution information are
printed using the Paper Size setting.
• Print Resolution
Images are printed using a 1-to-1 correspondence between the
image file pixels and printed dots. For example, the printed size
of a 600 x 300-pixel image file is 1 inch x 1/2 inch.
4
Press
5
Press [OK]. The TIFF/JPEG Size setting is set and the Function
menu reappears.
Note Images are automatically rotated during printing to
provide a closer match between the aspect ratios of the
image file and the paper used for printing.
1
In the Copies menu or the Paper Selection menu, press
a b
[Function] ([Right Select]). The Function menu appears.
2
Press
3
Press [OK]. The XPS FitTo Page screen appears.
a b
4
Press
5
Press [OK]. The XPS FitTo Page setting is set and the Function
menu reappears.
1
Use the procedure described in Print File (Printing and checking the
files in the USB memory) on page 6-7 to display a list of the files or
folders you want to check.
2
Press
6-14
or to select TIFF/JPEG Size.
or to select whether TIFF/JPEG Size mode is enabled.
or to select XPS FitTo Page.
or to select whether XPS FitTo Page mode is enabled.
or to select the folder or file you want to check.
Operation Panel