Kyocera Ecosys FS-C8650DN Operation Manual page 194

Finishing Error: a b
********************- 1 *Ignore
2
Display Error
No Staple Error (Setting when the staples run out)
This setting can be specified when an optional document finisher is installed.
Select the setting when the staples run out and the Add staples. message is displayed during stapling.
Display • A message is displayed and printing stops. Printing
Error automatically resumes when staples are added.
Ignore • A message is displayed, however, printing continues
without stapling.
No Staple Error: a b
1 *Ignore
********************-
2
Display Error
Stapling Limit (Setting when the number of sheets exceeds the stapling limit)
Select the setting when the number of printed sheets exceeds the number of sheets that can be stapled.
Display • A message is displayed and printing stops.
Error
Ignore • A message is not displayed and printing continues without
stapling.
1
In the Error Handling menu, press
Error.
2
Press [OK]. The Finishing Error screen appears.
3
Press or to select the setting for handling finishing error.
4
Press [OK]. The handling of finishing error is set and the Error
Handling menu screen reappears.
1
In the Error Handling menu, press
Error.
2
Press [OK]. The No Staple Error screen appears.
3
Press or to select the setting for handling no staple error.
4
Press [OK]. The handling of no staple error is set and the Error
Handling menu screen reappears.
6-68
Operation Panel
or to select Finishing
or to select No Staple