Jobfinish Notice (Setting For Notification When Jobs Are Finished) - Kyocera Ecosys FS-C8650DN Operation Manual

File Name Entry: a b
doc*
Additional Info.: a b
1 *Job No. + Date
********************-
5
Date + Job No.
JobFinish Notice (Setting for notification when jobs are finished.)
Notification that a job has finished is sent by E-Mail.
Note To send E-mail from this machine, set the SMTP and POP3 settings to On. For details, refer to the Protocol
Detail (Detailed settings for the network protocol) on page 6-46.
It is necessary to register a mail server. For the method for setting the server, refer to the section on Command Center
RX on page 2-18.
Function:
1
********************-
Paper Output
2
Collate
3
Offset
JobFinish Notice: a b
1 *Off ********************-
2
On
3
S
ABC
[ Text ]
4
5
6
7
1
a b
2
3
4
Press [OK]. The File Name Entry screen appears.
Enter the file name using the numeric keys.
Note Up to 32 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-6.
Press [OK]. The Additional Info. screen appears.
Press or to select from the additional information that can be set
for the file name.
The following settings can be selected.
• None (No additional information is added.)
• Date (To add the date.)
• Job No. (To add the Job Number.)
• Job No. + Date (To add the Job Number and date.)
• Date + Job No. (To add the date and Job Number.)
Press [OK]. Register the file name and the Function menu
reappears.
In the Copies menu or the Paper Selection menu, press
[Function] ([Right Select]). The Function menu appears.
Press or to select JobFinish Notice.
Press [OK]. The JobFinish Notice screen appears.
Press or to select On.
6-12
Operation Panel