Kyocera Ecosys FS-C8650DN Operation Manual page 293

Message
The file name
already exists.
You cannot copy.
The user name is not
registered.
This account ID is
already registered.
This login user name
already registered.
Toner is running out.
↓ ↑
[C][M][Y][K]
Unknown toner
installed. PC
[C][M][Y][K]
USB memory error.
Press [OK].
Corrective Action
Copying is not possible because data with the same file name exists at the
destination. Delete the data with the same file name at the destination before
copying.
The login user name entered is not registered or wrong. Check the login user
name.
The account ID set has already been registered. Set a different account ID.
The changed login user name has already been registered. Set a different login
user name.
Two messages are displayed alternately. The toner in the displayed color (C:
Cyan, M: Magenta, Y: Yellow or K:Black) has run low. Ensure that a new toner
container is available without delay. For details, Toner Container
Replacement on page 7-2.
This message is displayed if the installed toner container's regional specification
does not match the machine's.
Install the specified toner container.
An error occurred in the USB memory. The job stopped. Press [OK].
The possible error codes and their descriptions are as follows.
01:The amount of data that can be saved at once has been exceeded.
Restart the system or turn the power OFF/ON. If the error still occurs, the USB
memory is not compatible with the machine.
##
Use the USB memory formatted by this machine. If the USB memory cannot be
formatted, it is damaged. Connect a compatible USB memory.
8-15
Troubleshooting