Chapter 3 Setting Monitor; Adjusting Volume; Selecting Sound Source While Using The Displayport Signal Input; Enabling / Disabling Ddc/Ci Communication - Eizo FlexScan EV2730Q-GY User Manual

Chapter 3 Setting Monitor

3-1. Adjusting Volume

This function allows you to adjust the volume.
Adjustable range
0 to 30
Procedure
1. Press .
2. Use or for adjustment.
3. Press
Note
• The volume for the speakers and the headphone can be set individually.
3-2. Selecting sound source while using the DisplayPort
signal input
This function allows you to switch sound source during DisplayPort signal input. You can select the
Stereo Mini Jack or DisplayPort.
Procedure
1. Choose "Sound" in the Setting menu, and press
2. Choose "Source" in the "Sound" menu, and press
The "Source" menu appears.
3. Select "Stereo Mini Jack" or "DisplayPort" with
4. Press
Note
• This function is available with DisplayPort signal input.

3-3. Enabling / Disabling DDC/CI communication

This function allows you to enable / disable the DDC/CI communication (see
41)).
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "DDC/CI" in the "Monitor Settings" menu, and press
The "DDC/CI" menu appears.
3. Select "On" or "Off" with
4. Press
Note
• The DisplayPort input of this monitor does not support DDC/CI communication.
18
Chapter 3 Setting Monitor
to exit.
to exit.
or .
to exit.
.
.
or .
"6-8. Glossary" (page
.
.