Finishing Settings; Zoom Settings - Kyocera KM-C2030 Operation Manual

1.2 Available Features

Finishing Settings

Stapling
Copies are stapled together before they are fed out.
Stapling is only available if the optional finisher (DF-625 or DF-620) is
installed.
Hole-punching
Holes are punched in copies before they are fed out.
Hole-punching is only available if the punch kit (PH-620) is installed
in the optional finisher (DF-625).

Zoom Settings

Auto Size
G This setting automatically selects the most appropriate zoom ratio based on the
size of the document loaded and the specified paper size.
Full Size
G This setting makes a copy that is the same size as the document (× 1.000).
Enlarged copies
G Zoom settings for making enlarged copies from common standard document
sizes to standard paper sizes are available.
Example 1: A Letter-size document can be copied onto the larger 11 × 17-size
❍
paper.
Example 2: A Legal-size document can be copied onto the larger 11 × 17-size
❍
paper.
Reduced copies
G Zoom settings for making reduced copies from common standard document siz-
es to standard paper sizes are available.
❍ Example 1: A Legal-size document can be copied onto the smaller Letter-size
paper.
Example 2: An 11 × 17-size document can be copied onto the smaller Letter-
❍
size paper.
Minimal
G This setting slightly reduces the copy (×0.930).
❍ Selecting the "Minimal" setting ensures that any part of the original positioned
at the edge of the page will not be cut off in the copy.
Zoom copies
Any zoom ratio (between ×0.250 and ×4.000) can be specified.
G
❍ Touch and to specify the desired zoom ratio.
1
1-5