Stopping Printing; To Stop/Restart/Delete A Print Job - Kyocera KM-C2030 Operation Manual

2
2.3

Stopping Printing

A job can be canceled while it is being printed.

To stop/restart/delete a print job

1
Press the [Stop] key while the job is being printed. The printing
stops.
The message "Job has
been stopped." ap-
pears.
2
To continue printing the job, press the [Start] key.
Printing continues.
3
To delete a stopped print job, select the job that you wish to cancel, and then
touch [Delete].
4
After touching [Delete], the message "Job has been done improperly. Check the
record." appears. The job being printed is deleted.
5
Touch [Enter].
2-12
2.3 Stopping Printing