Kyocera KM-C2030 Operation Manual page 61

3
7
If paper of a non-standard size has
been loaded, slide the lateral
guides against the edges of the
loaded paper.
8
Close the paper drawer.
9
Turn the media type selection dial to the setting for the type of paper loaded.
Setting Paper Type
Plain Plain paper
Plain Second side of a
double-sided
copy on plain
paper
Thick1 Thick paper 1
Thick1 Second side of a
double-sided
copy on thick
paper 1
Thick2 Thick paper 2
Thick2 Second side of a
double-sided
copy on thick
paper 2
Thick 3 Thick paper 3
Thick 3 Second side of a
double-sided
copy on thick
paper 3
Envelope Envelopes
OHP Overhead
projector
transparencies
Tip
If postcards are loaded, set the media type selection dial to "Thick2".
If label sheets are loaded, set the media type selection dial to "Thick1".
3-12
Envelope
Notes
During manual
double-sided
copying
During manual
double-sided
copying
During manual
double-sided
copying
Thick3
During manual
double-sided
copying
3.5 Loading Paper
Plain
Plain
OHP
Thick2
Thick3
Thick2
Thick1
Thick1