Finishing Edge Combinations; Positioning Options For Finishing Edge; Custom Finishing Edge Settings; Setting The Finishing Edge - Kyocera TASKalfa 2551ci Driver Manual

Finishing Edge Combinations

Positioning Options for Finishing Edge

Custom Finishing Edge Settings

Setting the Finishing Edge

1
2
3
4
5
Printer Driver
Selecting Finishing edge makes some other features unavailable, such as
Separation and Rotated. Finishing edge cannot be used with the Poster
feature.
Finishing edge can be used with the following page size combinations:
A4 and A3 (210 x 297 mm and 297 x 420 mm)
B5 (JIS) and B4 (182 x 257 mm and 257 x 364 mm)
Letter and Legal (8.5 x 11 in. and 8.5 x 14 in.)
Letter and Ledger (8.5 x 11 in. and 11 x 17 in.)
16K and 8K (197 x 273 mm and 273 x 394 mm)
You can select from available options to specify the page edges to be aligned
and finished. For additional position settings, select Custom. Available options
depend on Print size, Orientation, Booklet, and Multiple pages per sheet
selections.
In the overview area at the bottom, the page image shows a blue highlighted
strip to indicate the current selected Finishing edge with Staple and Punch
positions, if selected. When the Staple option is used, the Finishing edge
selection determines where staples are placed. Use this image to verify your
selections for Finishing edge and Staple.
The illustrations in the Custom Finishing Edge Settings dialog box help you
visualize the page alignments. Select the one setting that best illustrates the
edge of the mixed pages you want to align.
In the Position list, you can select Custom to open the Custom Finishing
Edge Settings dialog box.
The top two settings (A4/Letter) are for the smaller size paper in the mixed
page document.
The next two settings (A3/Legal/Ledger) are for the larger size paper in the
mixed page document.
Note that a change to one custom Finishing edge setting adjusts other
selections to make them compatible with the change.
In the Basic tab, select the same size for Print size and Page Sizes.
In Basic > Source, select Auto source selection.
In the Finishing tab, click the Finishing edge icon.
In the Position list, select from available options, or select Custom. Positions
are based on the Print size selection in the Basic tab.
Click OK in all driver dialog boxes.
Finishing
7-3