Specifying The Document Binding Margin Position ("Margin" Setting); Specifying Thick Documents ("Thick Original" Setting) - Kyocera KM-C2030 Operation Manual

5 5.7 Selecting the Orig > Copy Settings (Original Direction and Margin Position Settings)

Specifying the Document Binding Margin Position ("Margin" Setting)

If a document with a binding margin is being copied, the position of the binding mar-
gin can be specified. Select the setting appropriate for the binding margin position
for your document.
Select this setting if the document is loaded with the binding margin at
the left.
Select this setting if the document is loaded with the binding margin at
the top.
As a default, the setting for the binding margin at the left is selected.
Note
If the position of the binding margin for the document is different from that of the
selected Margin setting, copies made using the erase settings will not be printed
correctly.
When loading a document with a binding margin, position the top of the docu-
ment toward the rear of the copier. For details, refer to "Feeding the Document"
(p. 4-5).

Specifying Thick Documents ("Thick Original" Setting)

Select this setting if a thick document is being copied.
To specify a thick document (34-1/4 lbs. to 55-3/4 lbs.), touch [Thick Original].
5-28