To Make A Reduced Copy Of The Document - Kyocera KM-C2030 Operation Manual

2.2 Practical Copy Examples

To make a reduced copy of the document

An example for making one single-sided Letter-size reduction from a single-sided
11 × 17-size original is described below.
Load the document into the duplexing document
feeder.
When loading the document, load it so that the side
that you wish to copy faces up and the top is toward
the left side of the copier. Then, adjust the document
guides to fit the size of the document.
Touch [Zoom].
Touch [11 × 17Ö Letter].
Touch [Paper].
Make sure that Letter-size paper is loaded into a
paper drawer.
Make sure that the number of copies is set to "1".
Press the [Start] key. The copy job appears in the job
display.
Copying is performed in the order that the job was
programmed.
A
A
2
2-7