(3)
Release the hooks "B" of the LCD holder in two places, which fix the LED PCB ASSY (PT-
9600 only).
(4)
Melt and strip the solder of the LCD PCB ASSY with which the leads (three harnesses) of
the LED PCB ASSY are connected. (PT-9600 only)
(5)
Detach the diode (SLR-342MC) on the LCD PCB ASSY from the LCD PCB ASSY by
melting solder (PT-9600 only).
(6)
Release the hooks "C" in four places to detach the LCD holder from the LCD PCB ASSY
(PT9600 only).
LED PCB ASSY
LCD holder
LCD PCB ASSY
Hook "B"
Hook "C"
Fig. 3.1-39 Removing the LCD Module Unit (3)
Diode
Hook "B"
LCD holder
III-25
LCD PCB ASSY
Leads (three harnesses)
LCD PCB ASSY