Brother PT-9600 Service Manual page 102

(4) After cutting the tape, the mode returns to the Print Mode 1 as shown in Fig.33.
Note 2: For the product including the jog dial specification, this mode shifts to the Jog
Check Mode as shown in Fig. 29 after the completion of full key check skipping
the OK display and OK print processes. (Depress of the "Z" key allows shifting
to the Jog Check Mode).
(5) Press the "RET" key while the LCD displays as shown in Fig.29. The display shifts to
one as shown in Fig.30.
(6) The arrow sign (
dial. Press the "Set" key (the central button of the jog dial) when the arrow sign
reaches the left by 3 points. (just above the first cursor at the left end) in the left mode
as shown in Fig.31.
(7) If any error is detected, the machine displays as shown in Fig.32.
(8) When no error is confirmed, the display shifts to the right mode. Do the same check to
the right direction.
(9) When all the check completes successfully the machine displays "OK" and then prints
the same contents as shown in Fig.28.
(10) After cutting the tape, the mode shifts to the Print Mode 1 as shown in Fig.33.
Fig. 29
or ) moves synchronizing with the rotating direction of the jog
Fig. 30
Fig. 31
Fig. 32
III-68