Brother PT-9600 Service Manual page 49

Disassembling the Half Cutter Chassis ASSY
(1) Remove six screws to remove the half cutter chassis ASSY from the chassis ASSY.
Warning : Take care not to get injured in your fingers with the cutter blade.
Chassis ASSY
Fig. 3.1-21 Removing the Half Cutter Chassis ASSY (1)
(2) Remove two screws to remove the HC support plate from the half cutter chassis ASSY.
(3) Remove two screws to remove the cutter sensor PCB ASSY from the half cutter chassis
ASSY.
Half cutter chassis ASSY
HC support plate
Screws
Fig. 3.1-22 Removing the Half Cutter Chassis ASSY (2)
Screws
III-15
Screws
Half cutter chassis ASSY
Cutter sensor PCB ASSY
Screws