Point-To-Point Bridge Configuration - NETGEAR DGND3700 User Manual

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
To view or change these configurations, from the main menu, select Wireless Repeating
Function:
Enable Wireless Repeating. Select this if you wish to use either bridge mode or repeater
mode, and then select the mode you want for your environment.
Wireless Repeater. In this mode, the router communicates only with another base
station–mode wireless station. You have to enter the MAC address (physical address) of the
other base station–mode wireless station in the field provided. WEP can (and should) be
used to protect this communication.
Wireless Base Station. Select this only if this router is the master for a group of
repeater-mode wireless stations. The other repeater-mode wireless stations have to be set to
wireless repeater mode, using this router's MAC address. They then send all traffic to this
master, rather than communicating directly with each other. WEP can (and should) be used
to protect this traffic.
If this option is selected, you have to enter the MAC addresses of the other access points in
the fields provided.

Point-to-Point Bridge Configuration

In point-to-point bridge mode, the wireless modem router communicates as an access point
with another bridge-mode wireless station. As a bridge, wireless client associations are
disabled—only wired clients can be connected. You have to enter the MAC address of the
Advanced Settings
133