NETGEAR DGND3700 User Manual page 102

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Table 18. Gateway-to-gateway VPN tunnel configuration worksheet (continued)
Parameter
Authentication Protocol
Diffie-Hellman (DH) Group
Key Life in seconds
IKE Life Time in seconds
VPN Endpoint
Gateway_A
Gateway_B
Note: The LAN IP address ranges of each VPN endpoint has to be
different. The connection will fail if both are using the NETGEAR
default address range of 192.168.0.x.

To configure a gateway-to-gateway VPN tunnel using the VPN Wizard:
1. Log in to Gateway A on LAN A. From the main menu, select VPN Wizard. Click Next,
and the Step 1 of 3 screen displays.
2. Fill in the Connection Name and pre-shared key fields. Select the radio button for the type of
target endpoint, and click Next, and the Step 2 of 3 screen displays.
Value to Be Entered Field Selection
N/A
N/A
28800 (8 hours)
3600 (1 hour)
Local IPSecID LAN IP Address
GW_A 192.168.0.1
GW_B 192.168.3.1
Virtual Private Networking
MD5
Group 1
N/A
N/A
Subnet Mask
255.255.255.0
255.255.255.0
102
SHA-1
Group 2
FQDN or Gateway
IP (WAN IP
Address)
14.15.16.17
22.23.24.25