Configuring A Point-To-Point Bridge Configuration - NETGEAR RangeMax DGN3500 User Manual

RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual
To view or change these configurations, select Advanced Wireless Settings from the main menu,
and then select the WDS radio button:
Figure 5-9

Configuring a Point-to-Point Bridge Configuration

In point-to-point bridge mode, the DGN3500 modem router communicates as an access point with
another bridge-mode wireless station. As a bridge, wireless client associations are disabled—only
wired clients can be connected. You must enter the MAC address of the other bridge-mode
wireless station in the field provided. Use wireless security to protect this communication.
The following figure shows an example of point-to-point bridge mode.
5-18 Advanced Configuration
v1.0, November 2009