Connection Status Button; View Attached Devices - NETGEAR DGND3700 User Manual

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700

Connection Status Button

In the Router Status screen, click the Connection Status button to display a screen similar to
this:
Figure 38. Connection Status screen
Connection Time. The time elapsed since the last connection to the Internet through the
ADSL port.
Connecting to sender. The connection status.
Negotiation. Success or Failed.
Authentication. Success or Failed.
Obtaining IP Address. The IP address assigned to the WAN port by the ISP.
Obtaining Network Mask. The network mask assigned to the WAN port by the ISP.

View Attached Devices

The Attached Devices screen presents a table of all IP devices that the wireless modem
router has discovered on the local network. Select Maintenance > Attached Devices to view
the following table:
Figure 39. Attached Devices screen
For each device, the table shows the IP address, device name if available, and the Ethernet
MAC address. Note that if the wireless modem router is rebooted, the table data is lost until
the wireless modem router rediscovers the devices. To force the wireless modem router to
look for attached devices, click the Refresh button.
Network Maintenance
72