Vpn Tunnel Control; Activate A Vpn Tunnel - NETGEAR DGND3700 User Manual

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
b. Click the VPN Status button to display the Current VPN Tunnels (SAs) screen:
c. Click Connect for the VPN tunnel you want to activate. View the VPN Status/Log
screen to verify that the tunnel is connected.

VPN Tunnel Control

Activate a VPN Tunnel

There are three ways to activate a VPN tunnel:
• Use the VPN Status screen.
• Ping the remote endpoint.
• Start using the VPN tunnel.
Note: See Use Auto Policy to Configure VPN Tunnels
information about how to enable the IKE keep-alive capability on an
existing VPN tunnel.
Use the VPN Status Screen to Activate a VPN Tunnel

To use the VPN Status screen to activate a VPN tunnel:
1. Log in to the wireless modem router.
Virtual Private Networking
105
on page 112 for