N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
To launch this function, click the Windows Start button, then select Programs >
NETGEAR ProSafe VPN Client > Log Viewer. The VPN Status/Log screen for a
successful connection is shown in the following figure:
Note:
Use the active VPN tunnel information and pings to determine
whether a failed connection is due to the VPN tunnel or some reason
outside the VPN tunnel.
The Connection Monitor screen for this connection is shown in the following figure:
In this example you can see these settings:
•
The wireless modem router has a GW address (public IP WAN address) of 22.23.24.25.
•
The wireless modem router has a remote address (LAN IP address) of 192.168.3.1.
•
The VPN client PC has a local address (dynamically assigned address) of 192.168.2.2.
While the connection is being established, the Connection Name field in this screen displays
SA before the name of the connection. When the connection is successful, the SA changes
to the yellow key symbol shown in the previous figure.
Virtual Private Networking
100