Repeater With Wireless Client Association - NETGEAR DGND3700 User Manual

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
• All APs, including the DGND3700 wireless modem router, have to use the same
SSID, channel, authentication mode, if any, and WEP security settings if security is in
use.
• All point-to-point APs have to have the MAC address of AP 1 (the DGND3700
wireless modem router in the previous figure) in the Remote AP MAC address field.
4. Verify connectivity across the LANs. A computer on any LAN segment should be able to
connect to the Internet or share files and printers with any other PCs or servers connected to
any of the three LAN segments.
Note: Wireless stations configured as they are in
will not be able to connect to the wireless modem router or access
points. If you require wireless stations to access any LAN segment,
you can use additional access points configured in wireless access
point mode in any LAN segment.

Repeater with Wireless Client Association

In the repeater mode with wireless client association, the DGND3700 wireless modem router
sends all traffic to a remote access point. For the repeater mode, you have to enter the MAC
address of the remote "parent" access point. Alternatively, you can configure the DGND3700
wireless modem router as the parent by entering the address of a "child" access point. Note
that the following restrictions apply:
• You do not have the option of disabling client associations with this DGND3700 wireless
modem router.
• You cannot configure a sequence of parent-child APs. You are limited to only one parent
access point, although if the DGND3700 wireless modem router is the parent access
point, it can connect with up to four child APs.
Figure 52
Advanced Settings
136
on page 134