Shifting A Stitch Pattern - Brother BAS-343E Instruction Manual

6. Panel operation

6-11. Shifting a stitch pattern

• Programs which have already been programmed can be moved up, down and to the left and right.
(However, such patterns will be reset if the power supply is turned off or the program number is changed.)
• The feed position can be set to the any position desired.
u
X - SCALE
i
Y - SCALE
SPEED
‡ !0
B.T. COUNTER
SPLIT N .
R / W
r
1. Press the MENU switch y until the B.T. COUNTER indicator !0 illuminates.
2. Press and hold the TEST switch !5 and press the R/W switch r. The test indicator !6 will light, and <
appear in the counter t.
3. Press the MENU switch y so that either the X-SCALE indicator u or Y-SCALE indicator i illuminates.
4. Turn the setting dial !2 to move the feed mechanism one pulse at a time.
• If the setting dial is turned counterclockwise while the X-SCALE indicator is illuminated, the feed mecha
nism will move to the right.
• If the setting dial is turned clockwise while the X-SCALE indicator is illuminated, the feed mechanism will move
to the left.
• If the setting dial is turned counterclockwise while the Y-SCALE indicator is illuminated, the feed mechanism will
move up.
• If the setting dial is turned clockwise while the Y-SCALE indicator is illuminated, the feed mechanism will move
down.
5. When the TEST switch !5 is pressed after the above fine adjustments have been made, the TEST indicator !6 and
display window t will both switch off and movement of the stitch pattern will be completed. (*1)
(*1) When moving the stitch pattern, the sewing start position can be moved to any desired point within the sewing
area, but if the pattern goes outside the sewing area, an error will occur during sewing and you will not be able
to sew the pattern. Give consideration to the pattern as a whole when moving it.
26
t
B.T. SET
MENU MENU
TEST TEST
y ! 2
BAS-343E
POWER
. SET B.T. CHANGE
STEP BACK
! 6
! 5
> will