Panel Operation; Explanation Of Panel - Brother BAS-343E Instruction Manual

6. Panel operation

6-1. Explanation of panel

PROGRAM NO. PROGRAM NO.
w\
e
R / W
r
q POWER indicator ................... When the power is turned on, the indicator lights to show that t he power is on.
w PROGRAM No. display .......... Displays the program number 00 - 99.
e Program select switch ............ Used to select the program number when reading a program from or writing a
r Program Read/Write switch Used to read a program from floppy disk, or to write a newly programmed stitch
............................................... Up to ten patterns (00 - 99) can be stored on each disk.
t Display screen ........................ Used to display data such as menus, errors and memory switch settings.
y Menu switch ........................... Used to select the desired menu ( scale, speed, bobbin thread counter, split
u X-SCALE indicator ................. Illuminates when X-scale mode has been selected using the menu switch y.
i Y-SCALE indicator .................. Illuminates when Y-scale mode has been selected using the menu switch y.
o SPEED indicator..................... Illuminates when speed mode has been selected using the menu switch y.
BAS-300E series
MENU
u
X - SCALE
i
Y - SCALE
o
SPEED
!0
B.T. COUNTER
!1
SPLIT N .
y
program to disk.
pattern to floppy disk.
No.).One of the indicators u - ! 1 illuminates to indicate the menu selected,
and the setting for that menu them appears on the display screen t.
The illuminated indicator changes in the following order each time the switch
is pressed.
X-SCALE indicator u
B.T. COUNTER indicator ! 0
BAS-343E
t
B.T. SET
TEST
Y-SCALE indicator i
SPLIT NO. indicator ! 1
6. Panel operation
q
POWER
B. B.T. CHANGE . CHANGE
STEP BACK
SPEED indicator o
15