Brother BAS-343E Instruction Manual page 54

•¡ Memory Switches (00 •` 0F)
SWNo.
memo-00
memo-01
memo-02
memo-03
memo-04
memo-05
memo-06
memo-07
memo-08
memo-09
memo-0A
memo-0b
memo-0c
memo-0d
memo-0E
memo-0F
When moving to the home position, the feed plate moves in the order X Y and the start position moves in the order Y X.
When moving to the home position, the feed plate moves in the order Y X and the start position moves in the order X Y.
The forward position becomes the home position, and movement is in the order Y X and X Y. Used for attaching buttons.
Eject device operates. (Eject device is available by special order.)
Needle stops in up position during emergency stop. (Needle normally stops in down position.)
When sewing is finished, the feed plate moves via the machine home position to the start position
After the final stitch, the work clamp rises and then the feed plate returns to the start position.
Intermittent work clamp is not used (does not rise).
When using an alternating clamping presser (1/4 ON, 3/4 OFF), and when sewing overlapping rectangles.
Changes the wiper to air drive. (Air wiper is available as an option.)
Jog feeding becomes faster during programming.
ON when a two-stage tensioner is used. (Two-stage tensioner is available as an option.)
Clearing the emergency stop switch action is carried out using the STEP BACK switch.
Test feeding is carried out at the same speed as normal sewing. (For checking feed operation)
11. Changing special functions using the memory switches
When ON
BAS-343E
47