3-4. Connecting the ground wire
Be sure to connect the ground. If the ground connection is not secure, you run the risk of receiving a
serious electric shock.
3-5. V-belt tension
3-6. Installing the foot switch
DANGER
Red
3-phase
White
power supply
Black
Yellow/Green
......... Connect to ground
9.8 N
10 - 12 mm
BAS-343E
Connection method for 3-phase power supply
These should approximately 10 - 12 mm of slack when V-
belt is loaded at 9.8 N (1 kgf). To adjust, loosen the two
nuts q, and shift the motor up or down.
Insert the connector of the foot switch w into the connec-
tor e of the control box q.
3. Preparation
5