Brother BAS-343E Instruction Manual page 52

E series programmable electronic pattern sewer

Hide thumbs Also See for BAS-343E:

Table of Contents

•¡ DIP switch D

SW No.

D - 1

The first two stitches at the sewing start will be sewn at low speed (approx. 260 rpm)

D - 2

The last two stitches at the sewing end will be sewn at low speed (approx. 260 rpm)

D - 3

D - 4

The last two stitches at the sewing end will be sewn at low speed (approx. 700 rpm)

D - 5

D - 6

When the upper shaft is stopped, the motor will change direction and the needle bar will return to the

D - 7

vicinity of the needle up stop position

D - 8

During an emergency stop, the thread is trimmed and the needle bar stops in the raised position.

When ON

Slow-speed sewing at the sewing start will be canceled

BAS-343E

•|

10. DIP switch

Table of Contents