[Paper Source Settings] - Konica Minolta bizhub 36 User Manual

5.4 [Print] tab
Item
[Paper Type]
[Collate]
[Auto Continue]
[Hold Job Timeout]

[Paper Source Settings]

Select [Print] ö [Default Settings] ö [Paper Source Settings].
Item
[Tray1]
[Tray2]
bizhub 42/36
Description
Select the type of paper loaded in the selected
tray.
Select whether or not collating pages sequentially
when printing multiple sets of copies.
Select whether or not printing continues if the size
or type of paper in the selected paper tray is differ-
ent from the size or type of paper for the print job.
Select the length of time until print jobs saved on
the hard disk are deleted.
Description
[Size Detection Select whether or not to automatically
Mode] detect the size of paper loaded in the
Tray 1.
If [Auto] is selected, [Paper Size] is
grayed out.
[Paper Size] Specifies the setting for the size of paper
loaded into Tray 1.
[Width] Specifies the paper width when [Paper
Size] is set to [Custom Size].
[Length] Specifies the paper length when [Paper
Size] is set to [Custom Size].
[Paper Type] Specifies the setting for the type of paper
loaded into Tray 1.
[Paper Size] Displays the setting for the size of paper
loaded into Tray 2.
[Paper Type] Specifies the setting for the type of paper
loaded into Tray 2.
5
Control Panel
Refer to the [User's
Guide Print Opera-
tions].
page 4-22
page 4-24
Control Panel
Refer to the [Us-
er's Guide Print
Operations].
5-73