Error Message - Konica Minolta bizhub 36 User Manual

8.2

Error Message

8.2 Error Message
Follow the instructions below if error messages are displayed.
Message
[Configuration of Options
Changed]
[Configuration of options has
been changed. Power OFF and
ON.]
[Job Log Error]
[The job log has reached the
maximum allowed. Contact the
administrator.]
[Card Authentication Registra-
tion Error]
[Authentication failure. Try again
from the beginning.]
[Counter reached its limit.]
[Counter has reached its maxi-
mum allowance. Please delete
the job.]
[Expiration Error]
[The Enhanced Server Authenti-
cation application has expired.
Change the User Authentication
method to one other than En-
hanced Server Authentication.]
[IEEE802.1x Authentication fail-
ure.]
[Please reboot.]
[IEEE802.1x Authenticating]
[Please wait.]
[Incorrect HDD]
[Format HDD.]
bizhub 42/36
Possible Cause
While the power of the machine
was ON, the configuration of
options was changed.
The write area of the job log has
reached the maximum allowed.
Error occurred while reading IC
card.
The upper limit of the counter is
exceeded.
In external server authentica-
tion, the account is expired.
Due to timeout during
IEEE802.1X port authentication,
user was automatically forced to
log off.
IEEE 802.1X port authentication
is being performed.
The HDD used in another ma-
chine is installed.
Remedy
Turn the machine off, then on
again.
Delete the job log using the Con-
trol Panel or PageScope Web
Connection.
Restart registration from the be-
ginning.
Delete a job.
Contact your server administra-
tor.
Reboot the machine, perform
IEEE802.1X port authentication,
and log in.
If authentication is successful, the
message is cleared.
If authentication times out, turn
the machine off, then on again.
Format the HDD from the control
panel.
8
8-3