Header/Footer Settings] - Konica Minolta bizhub 36 User Manual

4.18 [Fax Settings]
4.18.2

[Header/Footer Settings]

Specify the position on a page where sender information and fax ID that are printed on received documents.
%
Press the Utility/Counter key ö [Admin Settings] ö [Fax Settings] ö [Header/Footer Settings].
Settings
[Header Position]
[Fax TX Header Name]
[Footer Position]
Factory default
[Header Position]
[Fax TX Header Name]
[Footer Position]
The following indicates where to print sender information or reception information.
- [Inside Body Text]: The sender or receiving information is added so that it is overlaid on part of the orig-
inal image before the fax is being sent.
bizhub 42/36
Specify the position of the sender information to be added on a fax docu-
ment sent from this machine. The added sender information is printed as a
part of the image on the document received by the recipient. If you select
[OFF], the sender information will not be added. [OFF] is not displayed if
[Fax Target] is set to [U.S.A] or [Hong Kong].
Specify the items to be added as the sender information.
Specify the position of the reception information (reception time and re-
ception number) to be printed on a document received by this machine. If
you select [RX Ft. OFF], the reception information will not be printed.
[Outside Body Text]
[ON]
[RX Ft. OFF]
FROM:MFP01 TO:123456789 10/10/2011 13:22:11 #138 P.001/001
4
4-49