Emulation] - Konica Minolta bizhub 36 User Manual

4.9 [Print Settings]
4.9.6

[Emulation]

Configure default of printer languages and fonts.
%
Press the Utility/Counter key ö [Admin Settings] ö [Print Settings] ö [Emulation].
Settings
[Default Emulation]
[PS]
[PCL]
[XPS]
Factory default
[Default Emulation]
[Wait Timeout]
[Print PS Errors]
[PS Protocol]
[CR/LF Mapping]
bizhub 42/36
Select the machine emulation language.
If [Auto] is selected, the machine automatically selects the machine emu-
lation language from the data stream.
[Wait Timeout] Specify the time until an error is determined to be
a PostScript error.
If [0] is selected, no timeout is performed.
[Print PS Errors] Select whether or not an error page is printed
when a Postscript error occurs.
[PS Protocol] Select the protocol for data transmissions with a
PostScript data stream.
If [Auto] is selected, the machine automatically
selects an applicable protocol from the data
stream.
[CR/LF Mapping] Select the definitions of the CR/LF codes in the
PCL language.
[Line/Page] Specify the number of lines per page in the PCL
language.
[Font Setting] •
•
•
[Digital Signature] Select whether or not to enable XPS digital signa-
tures.
[Print XPS Errors] Select whether or not an error report is printed af-
ter an XPS error has occurred.
[Auto]
[0]
[OFF]
[Auto]
[CR=CR LF=LF]
[Font Number]: Specify the default font in the
PCL language. The font numbers that appear
correspond to the PCL font list.
[Pitch Size]: Specify the font size in the PCL
language. If the setting selected for [Font
Number] is for a bitmap font, [Pitch Size] ap-
pears. If the setting selected for [Font
Number] is for an outline font, [Point Size] ap-
pears.
[Symbol Set]: Specify the symbol set used
with the PCL language.
4
4-26