(5) Entering the program name
Enter the program name by using the following steps.
•
Character entry screen
No.
Part
1
Display box
2
[< – –], [–– > ] keys
3
[Back] key
4
[Cancel] key
5
[Del.] key
6
[End] key
7
[Space] key
8
Character entry
keys
* To enter the numerals, use the numeral keys.
Inch specifications
Metric specifications
The entered character is displayed in this box.
Touch these keys to move the cursor in the Display box toward right-hand or left-
hand side.
Touch this key to delete the entered characters one-by-one toward left-hand side.
Touch this key to cancel the character entry and return to the previous screen.
Touch this key to delete the entered characters one-by-one from the cursor
position to the right-hand side.
When the entry is complete, touch this key. The entry is enabled and the display
will return to the previous screen.
Touch this key to enter 1 space.
Touch these keys to enter the character. Before the character entry, you can select
the upper case keyboard layout by touching the [Shift] key. To return to the lower
case keyboard layout, touch the [Shift] key again.
CHAPTER 5 FUNCTIONS
Functions
5-37