Interrupt Copying - Kyocera KM-2530 Operation Manual

4
Touch the [+] key or [–] key to set the zoom ratio for the
vertical and/or horizontal direction.
The numeric keys can also be used by touching the
[# keys] key.
Inch specifications
Metric specifications
5
Check the direction of the original top side.
6
Copying will start when the [Start] key is pressed.
CHAPTER 4 BASIC OPERATION

3. Interrupt copying

Interrupt copying is useful if, during one copy job, other originals
need to be copied at different settings. The interrupted copy job
can be resumed at the same settings as before after the rush job
is finished.
1 2
1 2
Press the [Interrupt] key to light the indicator. The "Inter-
1
rupt mode OK." screen will appear.
Management Interrupt
2 3
Reset
5 6
Remove the present original(s) and put it (them) aside.
2
Set the new original(s) and execute copying.
3
When copying ends, press the [Interrupt] key again, and
4
replace the newly copied original(s) with the one(s) re-
moved before. Then, press the [Start] key.
The interrupted copy job will be resumed.
Management Interrupt
2 3
Reset
5 6
3 A
A 3
Energy Saver
Stop/
Clear
Energy Saver
Stop/
Clear
4-7