Kyocera KM-2530 Operation Manual page 100

CHAPTER 6 COPIER MANAGEMENT
•
Exposure steps
Selects how many exposure levels you want there to be in the
manual exposure mode.
Display the "Copy default" screen. (See (5) Accessing
1
the copy default setting mode.)
Inch specifications
Metric specifications
2
Select "Exposure steps" in the setting item list at the left-
hand side of the screen, and then touch the [Change #]
key.
The "Exposure steps" screen will appear.
Inch specifications
Metric specifications
3
Select adjust step for copy exposure, 1 step or 0.5 step.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the "Copy default" screen.
4
Touch the [Close] key.
The display will return to the "Copy default" screen.
5 Touch the [Close] key.
The display will return to the "Default setting menu"
screen.
6-26
•
Original type
Specify the copy quality mode that you want be automatically
selected each time the copier is turned on.
Display the "Copy default" screen. (See (5) Accessing
1
the copy default setting mode.)
Inch specifications
Metric specifications
2
Select "Original image quality" in the setting item list at
the left-hand side of the screen, and then touch the
[Change #] key.
The "Original type" screen will appear.
Inch specifications
Metric specifications
3
Select default mode of original image quality, "Text",
"Photo" or "Text + Photo".
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the "Copy default" screen.
4
Touch the [Close] key.
The display will return to the "Copy default" screen.
5
Touch the [Close] key.
The display will return to the "Default setting menu"
screen.