14. Original size selection
When setting the size of the original manually, only the specified
size will be scanned regardless of the size of the original.
11"✕17" (A3)
Specify the original size by touching the desired key.
1
Touch the [Function] key.
2
The Function screen will appear.
Inch specifications
Metric specifications
Touch the [Select orig. size] key.
3
The "Select original size" screen will appear.
Inch specifications
Metric specifications
11"✕8 1/2" (A4)
4
Specify the original size by touching the desired key.
5
When specifying the scanning area, touch the [Input size]
key.
The scanning area set-up screen will appear.
Inch specifications
Metric specifications
Specify the scanning area based on the left rear corner
6
by touching the [+] key or [–] key for the Y and X direc-
tions.
The numeric keys can also be used by touching the [#
keys] key.
7
Copying will start when the [Start] key is pressed.
CHAPTER 5 FUNCTIONS
5-25