Kyocera KM-2530 Operation Manual page 56

CHAPTER 5 FUNCTIONS
1 Set the original.
2
Touch the [Function] key.
The Function screen will appear.
Inch specifications
Metric specifications
3
Touch the [Cover] key.
The "Cover Mode" screen will appear.
Inch specifications
Metric specifications
Touch the [Cover] key.
4
The front cover set-up screen will appear.
Inch specifications
Metric specifications
5-24
5 Select the copying condition of the front cover.
6 Touch the [Cover] or [No cover] key for the back cover.
When the [Cover] key is touched, the selection screen
of the back cover will appear.
Inch specifications
Metric specifications
7
Select the copying condition of the back cover.
8 Press the [Start] key.
Scanning will start.
When originals are set in the Document Processor, copy-
ing will start after scanning the set originals.
When an original is set on the platen, a message for
scanning the next original appears. Go to the next step.
1 2 3
Reset
4 5 6
7 8 9
0
9 Replace the original and then press the [Start] key.
Scanning will start.
10 When all originals are scanned, touch the [Scanning fin-
ished] key. Copying will start.
Stop/
Clear
Start