Kyocera KM-2530 Operation Manual page 26

CHAPTER 4 BASIC OPERATION
Inch specifications
4
Metric specifications
4
4. Paper size selection
When "APS" highlights on the message display, paper of the same
size as the original is automatically selected. To copy the original's
image onto a desired size of paper without changing the size of
the image, press the Paper selection key for the desired size of
paper.
NOTE
• Automatic paper selection can also be turned off. (See "Paper
selection" on page 6-28.)
• The most frequently used cassette (paper feed drawer) to be
selected automatically can be specified. (See "Default cassette"
on page 6-28.)
4-2
Inch specifications
5
Metric specifications
5
5. Copy exposure adjustment
The copy exposure can be adjusted manually. By moving the cur-
sor on the exposure scale to the right, copies become darker. By
moving it to the left, copies become lighter.
When adjusting the copy exposure automatically, touch the [Ex-
posure mode] key and then the [Auto] key to set the Auto Expo-
sure mode. In the Auto Exposure mode, copy exposure is auto-
matically adjusted to an appropriate level based on the exposure
of the original.
Inch specifications
Metric specifications
When touching the [ECO] key to highlight it, the copier turns into
the toner economy mode. In the toner economy mode, the expo-
sure level will be lowered to reduce toner consumption.
The toner economy mode can also be selected by touching the
[On] key for "ECO mode" at the right side of the "Exposure Mode"
screen.
NOTE
• When the copies are too dark/light overall, exposure will be ad-
justed. (See "Auto exposure adjustment" on page 6-29.)
• The default setting of the copy exposure adjustment can be set
to auto exposure. (See "Exposure mode" on page 6-25.)