To change the displayed language that the operator panel displays, follow these steps:
1. Press Menu (
).
2. Press Scroll (
to
3. Press Scroll (
to
4. Press Scroll (
to
5. Press Scroll (
to
The available languages are English, Deutsch, Espanol, FRANCAIS, Italiano, and Nederlands.
6. Press Select (
) to save the selection.
7. Press Cancel (
) to return to Standby mode.
Power Save Mode
The Power Save mode allows your printer to reduce power consumption when it is not in actual use. When the printer does not
receive data for an extended period of time, power consumption is automatically lowered. To set how long the printer waits before
going to power save:
1. Press Menu (
).
2. Press Scroll (
to
3. Press Scroll (
to
4. Press Scroll (
to
5. Press Scroll (
to
The available options are 5, 10, 15, 30, 60 and 120(minutes).
6. Press Select (
) to save the selection.
7. Press Cancel (
) to return to Standby mode.
Changing the Font Setting
Your printer has preset the font for your region or country. To change the font or to set the font under special conditions, such as
the DOS:
1. Press Menu (
).
2. Press Scroll (
to
3. Press Scroll (
to
4. Press Scroll (
to
5. Press Scroll (
to
6. Press Select (
) to save the selection.
) to highlight Settings and press Select (
) to highlight Setup and press Select (
) to highlight Language and press Select (
) to display the language you want.
) to highlight Settings and press Select (
) to highlight Setup and press Select (
) to highlight Power Save and press Select (
) to display the time settings you want.
) to highlight Emulation and press Select (
) to highlight Setup and press Select (
) to highlight PCL and press Select (
) to access the required value.
).
).
).
).
).
).
).
).
).