Dell 5330dn - Workgroup Laser Printer B/W User Manual page 32

Menu Purpose:
selection:
PCL Sets the PCL emulation
configuration: font type,
symbol type, lines per
page, and font size.
PostScript
Values:
Typeface Select the standard font to
be used in PCL emulation.
PCL1 ~ PCL56
PCL1~PCL7's interval
between letters is
fixed, and
PCL8~PCL45's
interval is
proportional to the
font type and font
size. Adjust the font
size of PCL1~PCL7
using the Pitch item,
and PCL8~PCL45
using the Point Size
item.
PCL46~PCL56's
interval and font size
are fixed.
Symbol Selects the symbol set to
be used in PCL emulation.
ROMAN8 ~
The symbol set is the
OCR B
group of numbers, marks,
and special signs used
when printing letters.
Available symbol sets vary
depending on the Typeface
setting.
Point Size By selecting between PCL8
and PCL45 from the
4.00 ~ 999.75
Typeface menu, you can
(0.25 unit)
determine the font size by
setting the height of the
characters in the font.
Courier Select the version of
Courier font to use.
Regular, Dark
Pitch By selecting between PCL1
and PCL7 from the
0.44 ~ 99.99
Typeface menu, you can
(0.01 unit)
determine the font size by
setting the number of
characters that will print in
one horizontal inch of type.
The default value 10 is the
best size.
Lines Set vertical spacing from 5
to 128 lines for the default
5 ~ 128
paper size. The default
number of lines may differ
according to the paper size
and printing orientation.