Substitute Size; Configure Mpf; Bypass Mode; Tray Mode - Dell 5330dn - Workgroup Laser Printer B/W User Manual

5. Press Scroll ( to
and press Select (
6. Press Cancel ( ) to return to Standby mode.

Substitute Size

This setting is used to determine whether the printer can substitute another paper size when the requested paper size is not available in any
of the input trays. The Printer will substitute A4/Letter, A5/Statement, and B5/JIS B5. For example, if A4 is the requested paper size and
there is no A4 paper in any of the input source, then the printer will print on Letter size paper, if available.
When the substitute size is set to Off, it means no substitution is allowed for the requested paper size.

Configure MPF

Multi-purpose Feeder can be configured to behave in Tray mode or in Bypass mode by setting the Configure MPF menu in the operator
Panel.

Bypass Mode

In this mode, the printer pulls the paper from the Multi-purpose Feeder first unless it is closed or empty. The Multi-purpose Feeder gets
the highest priority and pulls whatever material is in the Multi-purpose Feeder.

Tray Mode

In this mode, the Multi-purpose Feeder is treated as another papertray; the printer pulls paper from the tray that matches the size and
type. First preference goes to the default source.
) to Off to disable tray linking
).