Editing A Watermark; Deleting A Watermark; Using Overlays; What Is An Overlay - Dell 5330dn - Workgroup Laser Printer B/W User Manual

To stop printing the watermark, select No Watermark on the Watermark drop-down list.

Editing a Watermark

1. To change the print settings from your software application, go to printer properties.
2. Click the Other Options tab and click Edit in the Watermark section. The Edit Watermarks window appears.
3. Select the watermark you want to edit on the Current Watermarks list, and change watermark message and the
options.
4. To save the changes, Click Update.
5. Click OK.

Deleting a Watermark

1. To change the print settings from your software application, go to printer properties.
2. From the Other Options tab, click Edit in the Watermark section. The Edit Watermarks window appears.
3. Select the watermark you want to delete on the Current Watermarks list and click Delete.
4. Click OK.

Using Overlays

What is an Overlay?

An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format
that can be printed on any document. Overlays are often used to take the place of preprinted forms and
letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing the exact
same information that is currently on your letterhead. To print a letter with your company's letterhead,
you do not need to load preprinted letterhead paper in the printer. You need only tell the printer to print
the letterhead overlay on your document.

Creating a New Page Overlay

To use a page overlay, you must create a new page overlay containing your logo or image.
NOTE: The overlay document size must be the same as documents you will print with the overlay.
Do not create an overlay with a watermark.
1. Create or open a document containing text or an image for use in a new page overlay. Position the
items exactly as you wish them to appear when printed as an overlay. If needed, save the file for
later use.
2. To change the print settings from your software application, go to printer properties.
3. Click the Other Options tab and click Edit in the Overlay section.