forms use inks that are compatible with this fusing temperature (180° C or 356° F for 0.1 second).
Paper Specifications
Category
Acid Content
5.5 pH or lower
Caliper
0.094-0.18 mm (3.0-7.0 mils)
Curl in Ream
Flat within 0.02 in (5 mm)
Cut Edge
Cut with sharp blades with no visible fray.
Conditions
Fusing
Must not scorch, melt, offset, or release hazardous emissions
Compatibility
when heated up to 180° C (356° F) for 0.1 second.
Grain
Long Grain
Moisture
4%-6% by weight
Content
Smoothness
100-400 Sheffield
Paper Output Capacity
Output
Location
Output tray
250 sheets of 75 g/m
(Face Down)
Rear door
100 sheets of 75 g/m
(Face Up)
Printer and Paper Storage Environment
Paper storage environmental conditions directly affect the feed operation.
Ideally, the printer and paper storage environment should be at or near room temperature not too dry or humid.
Remember that paper is hygroscopic: it absorbs and loses moisture rapidly.
Specifications
Capacity
2
bond (20 lb) paper
2
bond (20 lb) paper