Dell 5330dn - Workgroup Laser Printer B/W User Manual page 39
Mono laser printer
Hide thumbs
Also See for 5330dn - Workgroup Laser Printer B/W:
- Service manual (204 pages) ,
- User manual (128 pages) ,
- Product information manual (80 pages)
Table of Contents
Advertisement
3. Remove a new memory DIMM from its antistatic package.
4. Locate the extra DIMM slot and align the notch on the DIMM with the groove at the DIMM slot, holding the DIMM by
its edges.
5. Push the DIMM into the printer until it snaps into place. Ensure that the latches fit over the notches located on
either side of the DIMM.
6. Close the control board cover by aligning the groove on it with the notch on the printer and sliding it.
7. Reconnect the power cord and printer cable, and turn the printer on.
Advertisement
Table of Contents
